拋丸機常用參數及工作原理

青島普華重工為您分解拋丸機常用參數及工作原理：
   
在裡面拋丸設備我們之前看到的機理，研究對像是拋丸機的工作原理和設備結構、日常維護保養等要點，所以拋丸機的冷卻循環系統會更加精細化，進行細緻的研究，下面小編會附上設備參數。
拋丸機常用參數數據：

鋼板厚度600~1200mm，原拋丸量3400KG，拋丸器數量約7~13台，拋丸器轉速1500~2500轉，輸出功率拋丸設備是 90/KW。

拋丸機的工作原理
1.該拋丸機高速旋轉時會產生離心力和反作用力。只有這樣，才能將拋丸速度提高到有利於高速旋轉下氣流形成的狀態，使金屬工件表面獲得一層抗氧化層。
2.When the 拋丸設備throws the metal material layer, it is to clean up the rusty iron and oxide layer on the surface of the workpiece. It will enter the transportation room through the bottom of the 拋丸設備for lifting, and the lifter will automatically send the shot material after it is separated. In the recycling system of the 拋丸機, waste is recycled to reduce labor costs.
3.Because the 拋丸機 adopts a fully enclosed mode, the workpiece 拋丸機 produces a strong impact effect during high-speed operation, and will be worn to a certain extent by the outside of the 拋丸機 itself, so the equipment will be equipped with a cleaning room inside. The dust and debris left behind during the 拋丸機 are well treated.